null

TrailMaster Go Kart Parts

TrailMaster parts and model identification

Find the Right TrailMaster Go-Kart Part Without Guessing

Shop replacement parts by your exact TrailMaster model or by the system you are repairing. GoKartMasters uses separate model-specific listings because similar-looking TrailMaster go-karts can use different brakes, axles, electrical components, fuel-system parts and drivetrain pieces.

Start with the exact model—not appearance alone. Standard and Plus Minis use different parts. The 150 and 200 families share some chassis pieces but differ in important engine, electrical and drivetrain areas. Carbureted and EFI fuel-system parts are not interchangeable. If you are uncertain, identify your machine before ordering.

Best starting point

Shop Parts by Model

Choose your Mini, Mid, 150, 200, 300 or Blazer model to see listings written specifically for that machine. This is the easiest way to avoid ordering a part that only looks similar.

Choose my model

When you know the system

Shop Parts by System

Browse belts, brakes, chains, electrical parts, EFI components, fuel-system parts, steering, suspension, seats, wheels and other repair categories.

Choose a parts system

Model-Specific Parts and Owner Hubs

Use our owner hubs for identification help, known model differences, assembly references, service guidance and links to the correct parts categories.

How to Order the Correct TrailMaster Part

  1. Confirm the exact model. The engine number is not the go-kart model number.
  2. Open the correct parts breakdown and locate the numbered callout.
  3. Search the OEM number or shop within the model-specific category.
  4. Ask before installing if anything looks different. Installed parts are considered used, and electrical parts are not returnable.
Open Parts Breakdowns and Manuals

Parts Support for Every TrailMaster Owner

You do not have to purchase your machine from GoKartMasters to order parts from us. About 90% of the parts we sell are genuine TrailMaster OEM components. We occasionally offer a proven aftermarket part when it is better than the original, such as select spark plugs or upgraded gaskets.

If the part you need is not listed online, we can special-order parts for TrailMaster models we do not sell whenever the factory has them available. Send the exact model, serial-number plate, full-machine photograph, close-up of the part, mounting location, measurements and every number printed on the old part.

Looking for MB200, Hurricane or Storm parts? Visit TrailMaster Mini-Bike Parts.

  • Trailmaster BLAZER 200R Go Kart Engine, monochrome sketch of a compact small engine with wiring and cooling fins.

    Trailmaster BLAZER 200R Go Kart Engine

    Trailmaster Mid Size Engine Complete Engine with Starter Fits Mid XRS, Mid XRX, Mid XRX-R, Blazer 200R Trailmaster part number JFH168FLH-8cc Factory original engine, drop shipped from Trailmaster This engine replaces the 6.5 hp engine designed for the...

    $439.00
    Choose Options
  • Trailmaster Cheetah 8 Go Kart Rear Axle, a metal shaft with splines and threaded end, used as a replacement part for go-karts. Trailmaster Cheetah 8 Go Kart Rear Axle, metal part with threaded end and grooved shaft for vehicle rear wheel attachment.

    Trailmaster Cheetah 8 Go Kart Rear Axle

    Trailmasater Cheetah 8 Go-Kart Rear Axle Rear Axle  TrailMaster 8.010.199 or 8010199080G000 Rear Axle Fits 6.5HP or 7.0 hp Trailmaster Cheetah 8 go karts Buy all of your TrailMaster go-kart parts from GoKartMasters.com At GoKartMasters.com, we...

    $139.99
    Add to Cart
  • Trailmaster Cheetah 8 Reverse Gearbox, circular logo with a black background, white cartoon vehicle illustration, and the text 'Go Kart Masters.com' in stylized white font. Trailmaster Cheetah 8 Reverse Gearbox, circular logo with a black background, white cartoon vehicle illustration, and the text 'Go Kart Masters.com' in stylized white font.

    Trailmaster Cheetah 8 Reverse Gearbox

    Trailmaster Cheetah 8 Go Kart Transmission   -Reverse Gearbox fit Cheetah 8 go kart - Transmission for Trailmaster Cheetah 8 -Trailmaster Factory Direct - TM part # 10000-K3 -This is a special order part and will be drop shipped form teh...

    $300.00
    Add to Cart
  • Trailmaster Mini XRX Go Kart Engine, sketch of a small, detailed model engine with components and wiring visible.

    Trailmaster Mini XRX Go Kart Engine

    Trailmaster Mid Size Engine Complete Engine with Starter Fits Mid XRS, Mid XRX, Mid XRX-R, Blazer 200R Trailmaster part number JFH168FLH-8cc Factory original engine, drop shipped from Trailmaster This engine replaces the 6.5 hp engine designed for the...

    $439.00
    Choose Options
  • TrailMaster Blazer150 & 150X Rear Axle, metallic gold-colored rear axle shaft for all-terrain vehicle. TrailMaster Blazer150 & 150X Rear Axle, metallic yellow and silver shaft for ATV and go-kart vehicles.

    TrailMaster Blazer150 & 150X Rear Axle

    Go-Kart Rear Axle  Rear Axle TrailMaster Rear Axle 8.010.057-150XRS Fits 150cc TrailMaster Blazer 150 And Blazer 150X  Go-Karts   Buy all of your TrailMaster go-kart parts from GoKartMasters.com At GoKartMasters.com, we sell...

    $229.99
    Add to Cart
  • Trailmaster 200 Go Kart EFI Fuel Tank, black fuel tank with a central inlet and mounting holes for installation. Trailmaster 200 Go Kart EFI Fuel Tank, black plastic fuel tank for go-kart with mounting points.

    Trailmaster 200 Go Kart EFI Fuel Tank

    Trailmaster 200 EFI model fuel tank Includes a new fuel pump installed into the tank.   This tank looks the same as carbureted models, but it is different. This tank has a larger hole on the bottom and smaller bolt holes where the fuel pump attaches...

    $199.99
    Add to Cart
  • TrailMaster 300 XRS Main Wire Harness

    Go-Kart Wire Harness TrailMaster Main Wire Harness for CARBURETOR version Fits Front Of Kart Headlights ,dash,Etc. Plugs into Aux Harness At Rear Of Kart Does NOT Include Aux Engine Harness Fits TrailMaster 300 XRS Go Karts Buy all of your...

    $129.99
    Choose Options

 

Looking for parts for your Trailmaster go kart? You've come to the right place. GoKartMasters.com has the best selection of Trailmaster parts on the internet with an ever-growing inventory. We are constantly working on adding new parts and parts breakdowns to make the process easier for our customers. If you cannot find the Trailmaster parts thath you need, give us a call and we can help you locate it. Even if it's not currently in stock, we work hand-in-hand with the factory warehouse and we can track down any special order parts you're looking for!

The most important thing to remember while searchign for parts is to be certain about which model you have. We have plenty of resources to help you determine what your kart is, but if you're not sure, just text or email us a few photos and one of techs can identify it for you (if it's a Trailmaster). There are some details about the models that you may be unaware of that will affect the parts you need to buy.

Trailmaster upgraded their 150cc buggy a few years ago, so now it is a 200- whether an XRS, XRX, Blazer, Challenger, etc. Generally speaking, most of the parts for the 150 model kart will fit the 200 model; while we work on adding the 200 to the fitment section of each part, you can search for 150 parts and find what you need. If you aren't sure, give us a call and we can doubel check for you. But especially the most common parts like air filter, spark plug, fuel filter, exhaust, carburetor, chains, wiring harnesses, brakes, tires, etc will be the same!

The mini karts also got an upgrade a few years ago- the old model is a "standard" and the model number will read as Mini XRS, Mini XRX, Mini XRX-R. The upgrade included a wide frame, a longer axle, bigger tires and wheels, and a hyrdaulix braking system- this is called the "plus" model and will read as Mini XRS+, Mini XRX+, Mini XRX-R +. A lot of the parts fit both standard and plus models, but there are quite a few that are not interchangeable, so pay close attention to the description of each part- we  have detailed information on each part that will help you know if it fits your model.

Keep in mind, the reverse models take a few different parts than the non-reverse models. This is true for the Mini and the Mid. Chains and belts will be different between the two. Even clutches and sprockets can be different between reverse or non-reverse. All of these details are in the title and description, but if you aren't sure, just give us a call! We want ot get you back to fun as quickly as possible so we want to make absolutely sure we get you the correct parts.

 

One last thing to be aware of- the Mid size karts are sometimes rated as a 200cc engine- and there is even a mid size model called the Blazer 200. Don't get this confused with the actual model number of the full sized adult go kart, the 200 XRS, 200 XRX or Blazer 200 X. We realize this is confusing, so we do our very best to give these details and warnings on each individual part listing. 

best warranty on trailmaster go karts